Vibratory machines for more aggressive deburring applications
From wing spars for mammoth aircraft to small parts that can be finished by the thousands in a single load, this uniquely flexible method produces exceptionally fine results, particularly in processing parts with blind or recessed areas.
Features:
- Your choice of 230 or 460 Volt, 3 phase, 60 cycle operation (other voltages upon request)
- Variable amplitude from aggressive to remove large burrs or gentle for delicate parts
- Constant speed machine set at factory
- 1” thick, cast molded polyurethane lining
- NEMA 12 enclosure equipped with start, stop buttons and a LCD timer for process repeatability time cycle control
- Economical finishing for parts
- Free sample processing for complete media/compound recommendation
Optional Items:
- Automatic Lubrications System
- Tub Dividers for dividing the tub into smaller compartments to run different medias or to keep parts from contacting each other.
- Compound supply tanks
- Variable Frequency tub drive
- Flowmeters for monitoring the amount of compound being used
- Air Operated Tub Discharge Door
- Manual or automated sound enclosures
- Can be used with material handling systems for full automation
- Rotating fixtures for holding parts to prevent contact
- Additional options are available
|
Model No. |
Tub Capacity |
Urethane Tub |
Tub |
HP |
|
V-3 |
2.5 |
15” |
17” |
2 |
|
V-5 |
5.2 |
31” |
17” |
5 |
|
V-7 |
6.1 |
31” |
17” |
5 |
|
V-8 |
8.1 |
33-3/4” |
19-3/4” |
7-1/2 |
|
V-12 |
12.6 |
33-3/4” |
23-1/2” |
10 |
|
V-16 |
17.1 |
96-3/4” |
17” |
15 |
|
V-17 |
16.5 |
45-3/4” |
23-1/2” |
15 |
|
V-26 |
27.2 |
153” |
17” |
20 |
|
V-27 |
27 |
114” |
19-3/4” |
20 |
|
V-52 |
52 |
142” |
23-1/2” |
40 |
|
V-70 |
70 |
189” |
23-1/2” |
40 |
|
V-88 |
88 |
240” |
23-1/2” |
50 |
|
V-122 |
122 |
336” |
23-1/2” |
100 |
|
V-3447 |
29 |
47” |
34” |
20 |
|
V-3496 |
58 |
96” |
34” |
40 |
|
V34-120 |
130 |
228” |
34” |
100 |
|
V-4448 |
48 |
48” |
44” |
40 |
|
V44-192 |
192 |
192” |
44” |
125 |