U-Bend Washer Machines

ALMCO offers …

cost-saving solutions to cleaning and drying problems you would expect only from the leader in industrial finishing systems. We’ve applied our engineering and field expertise gained from manufacturing machines for deburring parts, to solid systems designed for washing and drying in industry.

With Almco you can choose from custom-designed or standard line units for either batch or continuous processing.

Update your plant and fill your manufacturing process needs with parts cleaning machines built in the Almco tradition — with superb quality, durability, safety, and operational ease!

Flat-belt Washers

In-Line and U-Bend Designs — clean up your part of the act! Put Almco Super Spray to work washing your parts.

Flexibility is the design key for Almco flat-belt parts washers. Parts travel through the tunnel on either woven or flat wire belt construction with contaminants of oil or grease removed by powerful compound/water spray rinses provided by adjustable nozzles.

Six (6) stainless steel washer manifolds toprovide 360° spray pattern through stainless steel clip-on nozzles	U-bend belt washer construction showing 1st and 2nd stage rinse hoods on 180° turn and electrical panel	Five (5) 18 K.W. screw plug immersion heaters with stainless steel elements	#1 rinse station showing hood and stainless steel bag filtration system

Almco cleaning systems operate with one continuous belt to feed parts through washing, rinsing and drying chambers.

Continuous or batch parts cleaning and drying for industry! Almco meets that challenge with skill that built our renowned metal finishing reputation. We build custom products to individual needs and we’ve got the in-plant case histories to prove it!

Model PWRBD24-96E-U

Multi-Stage U-Shaped Conveyor Belt Wash/Dry System

Features:

• Five-stage wash, rinse, 2nd rinse, blow-off and drying unit
• Variable speed 24” wide stainless steel belt with 1” x 1” openings
• All stainless steel construction
• Two (2) stainless steel bag filtration units
• 96” long wash section with 385 gallon insulated tank
• Two (2) rinse sections located on the conveyor at 180° turn. Each has 165 insulated gallon tanks
• 48” long moisture blow-off section with 15 H.P. regenerative blower
• 48” long forced air electric dryer
• Remote conveyor controls
• Exhaust duct connections
• Removable stainless steel chip basket
• Emergency stop buttons
• Oil wheels
• Automatic solution make-up systems