POWDERED DEBURRING COMPOUND

Powdered deburring compound is formulated to assist burr removal by keeping the parts & media clean. This type type of compound also provides corrosion resistance to the parts and media.

ABRASIVE (3): All Purpose, aggressive cutting, medium fine aluminum oxide for use with all types of media to increase material removal rate on flat surfaces and provides normal finishing on corners.

  • pH range .5%/2.0%: 8.5/9.5
  • Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ABRASIVE (5): Fast Grinding, of all metals, normal life, quartz based, low foam, use with all media types, leaves a fine micro inch finish, moderately alkaline.

  • pH range .5%/2.0%: 10/11
  • Best for iron, steel, stainless alloys, copper, bronze, brass and zinc.

ABRASIVE (58): Extra Heavy Duty, long life abrasive, medium fine grit aluminum oxide/silicon carbide to blend parting lines, remove stock and heavy burrs on all metals when long grinding cycles and large amounts of scale, burrs or stock is to be improved.

  • pH range .5%/2.0%: 7
  • Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ABRASIVE (7A58): Very Coarse, highly alkaline, 60 to 220 grit, rapid cutting aluminum oxide, low foaming, long life. Use with all types of media.

  • pH range .5%/2.0%: 9/9.5
  • Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys and zinc.

ABRASIVE (40B): Silica Flour Abrasive, for an ultra-low fine micro inch finish on all metals. No impregnation leaves a light satin finish.

  • pH range .5%/2.0%: 7.8/8.5
  • Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ABRASIVE (570S): Aggressive Grinding, concentrated slightly alkaline compound, all purpose for use on any metals or media type, fast cutting. An economical alternative to aluminum oxide, low-foaming, long lasting, rinse free.

  • pH range .5%/2.0%: 7.5/8.5
  • Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ABRASIVE (3SC): Silicon Carbide Compound, medium fine, for use on all metals, fast cutting when mixed with all media types, recommended for stainless steel.

  • pH range .5%/2.0%: 7.5/8.5
  • Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

NON-ABRASIVE (2): Neutral pH Compound, for cleaning, grinding and deburring all metals, retards rust, keeps media clean, prevents loading and glazing of abrasive media. Very effective on aluminum.

  • pH range .5%/2.0%: 8.7
  • Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

NON-ABRASIVE (2A): Neutral pH Compound – Low Foam, same as No.2. For vibratory use, very effective on non-ferrous metals.

  • pH range .5%/2.0%: 8.7
  • Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

NON-ABRASIVE (7A): Heavy Duty, highly alkaline compound for grinding and cleaning operations. Non-foaming, producing high colors on ferrous metals and keeps media free from loading. Saponifies and emulsifies heavy fatty oils and greases, excellent rust inhibitor.

  • pH range .5%/2.0%: 11.2/12.2
  • Best for iron, steel and stainless alloys.

CONNECT WITH OUR TEAM

PHONE

1.800.521.2740

EMAIL

sales@almco.com

BUSINESS HOURS

Mon-Fri 8am-5pm CST