Part Washing Equipment

RTW-25E Compact Rotary Parts Washer

Industrial-Duty Cabinet Washer for Heavy Parts Cleaning

The ALMCO RTW-25E Rotary Top Load Parts Washer is a rugged, electrically heated batch cleaning system designed for manufacturers that require reliable, high-performance cleaning of machined components, castings, fabricated parts, tooling, and assemblies.

OVERVIEW

RTW-25E System Overview

The ALMCO RTW-25E Rotary Top Load Parts Washer features a 25-inch rotating turntable and powerful spray-wash technology, delivering consistent cleaning results while maintaining a compact footprint for production and maintenance operations.

Designed for use with water-based cleaning solutions, the RTW-25E combines heated cleaning, rotating part presentation, and high-pressure spray coverage to remove oils, coolants, chips, and contaminants from a wide range of industrial components.

Load parts directly onto the stainless-steel turntable, close the lid, and start the automated cleaning cycle.

KEY ADVANTAGES

  • Industrial-duty stainless steel construction
  • 500 lb turntable load capacity
  • 25″ diameter rotating worktable
  • Electrically heated 80-gallon cleaning reservoir
  • Powerful spray coverage from top, side, and bottom manifolds
  • Automatic rotating wash cycle
  • Compact footprint for manufacturing environments
  • Easy top-loading design
  • Fully assembled and factory-tested before shipment
  • Designed and built in the USA by ALMCO

COMMON APPLICATIONS

  • Precision machined components
  • Aerospace parts
  • Industrial castings
  • Tooling and fixtures
  • Fabricated assemblies
  • Maintenance and repair components
  • Manufacturing work-in-process parts
  • Oil, coolant, and chip removal applications
RTW-Sidebar

TECHNICAL SPECIFICATIONS

The RTW-25E utilizes a rotating turntable and fixed spray manifold system to provide complete parts coverage throughout the wash cycle. Components are loaded directly onto the turntable, where they rotate through a high-volume spray pattern generated by strategically positioned top, side, and bottom nozzles.

An 18 kW electric heating system maintains cleaning solution temperature for effective contaminant removal, while a heavy-duty centrifugal pump delivers up to 65 GPM at 45 PSI to the spray system. The combination of heat, chemistry, impingement, and rotation provides consistent cleaning performance across a wide variety of part geometries.

 

Specification RTW-25E
Turntable Diameter 25 in.
Load Capacity 500 lbs
Working Height 32 in.
Reservoir Capacity 80 gallons
Heating System 18 kW Electric
Pump Capacity Up to 65 GPM @ 45 PSI
Pump Motor 3 HP
Turntable Drive 1/4 HP DC Gearmotor
Electrical Service 460V / 3 Phase / 60 Hz
Approximate Length 49 in.
Approximate Width 41 in.
Approximate Height 56 in.

SYSTEM DETAILS

RTW Washer

RTW Cabinet

Wash Cabinet

The RTW-25E wash cabinet is fabricated from 10-gauge 304 stainless steel utilizing an all-welded design for long-term durability and leak-free operation. The cabinet includes an integrated 80-gallon solution reservoir, a removable stainless-steel chip tray, and an insulated lid assembly to improve operating efficiency.

A gas-assisted stainless-steel lid simplifies loading and unloading while securely containing wash spray during operation. The machine’s rugged construction is engineered for years of dependable service in demanding industrial environments.

RTW Turntable

RTW Turntable

Turntable

The 25” diameter turntable is fabricated from stainless steel and is engineered for loads up to 500 pounds and rides on tapered roller bearings for smooth, reliable operation.

During the wash cycle, the turntable rotates at approximately 2.5 RPM, ensuring all part surfaces are exposed to the spray pattern for consistent cleaning results.

RTW Sprayer

RTW Sprayer

High-Performance Spray Washing System

At the heart of the RTW-25E is a heavy-duty Gusher centrifugal wash pump that delivers high-volume cleaning solution through a network of stainless-steel spray manifolds.

The system uses strategically positioned top, side, and bottom spray headers fitted with stainless-steel industrial spray nozzles to clean all exposed surfaces thoroughly. The swing-away upper manifold design provides convenient access during loading and unloading.

RTW Electrical

RTW Electrical

Electrical Controls

Electrical controls are housed in a Hoffman (or Saginaw) brand NEMA 12 enclosure mounted on the side of the wash cabinet (as room permits, otherwise enclosure is free standing). Components within the enclosure are finger-safe and are Allen-Bradley brand unless noted otherwise. Components include a main disconnect switch, Littelfuse fuse holders and branch circuit fuses, terminal strips, a
G.E. (or equal) transformer to provide a 115 Volt control circuit, master control relay, Minarik 90 Volt DC motor controller (for the turntable drive), heating system contactor, and an IEC-style motor circuit protector with thermal overload and short circuit protection.

An equipment power on pushbutton, an emergency stop pushbutton are provided on the front door of the main electrical enclosure, along with the reservoir heating system’s Watlow digital temperature controller. Machine start/stop controls are provided on the side of the enclosure facing the front of the machine. Buttons and lights are Allen-Bradley brand.

The machine is wired per NEC (NFPA 70) and NFPA 79 electrical standards, ready for connection to your electrical service.

RTW Controls

RTW Controls

Electric Heat

Electric Heat for Wash/Rinse Tank. Consists of (2) Indeeco brand 12 kW screw-plug immersion heaters capable of heating tank contents from 70 to 140 degrees (F) in one hour. The heaters have stainless steel elements and fittings, with cast iron NEMA 4 conduit boxes. One heater is located in the wash compartment and one heater is located in the rinse compartment. The Rinse heater is made from Incoloy to be used with straight water.

A Watlow brand temperature controller mounted on the door of the main electrical enclosure provides digital read-out and control of solution temperature in the wash tank. A stainless steel type-J thermocouple located in the tank provides an input signal to the controller, which switches the heaters on and off to maintain setpoint temperature.

Insulation for Heated Wash Tanks. Consists of a 2″ thickness of fiberglass batting on all exterior tank walls, held in place by a 14 gauge stainless steel jacket. Also includes stainless steel covers for open areas of tank.

RCW Bag Filtration

Bag Filtration

Bag Filtration

Consists of a floor-mounted bag filter housing and a filter bag rated at 50 microns. The 4″ diameter by 12″ tall stainless-steel housing is over-sized for less frequent filter change-outs, and the unit is piped between the spray pump and the spray nozzles in the Washer. The housing includes a stainless-steel internal basket for holding one filter bag, and the hinged stainless-steel cover is held in place with three eyebolts. Inlet and outlet pressure gauges are also provided.

FREQUENTLY ASKED QUESTIONS

How do I get the machine to my facility?

ALMCO can help arrange a truck shipment to get the machine to your facility. You may need to work with a local machine rigging company to place the machine properly in your facility.

How do I get the machine installed and set up to run at my facility?

After the purchase of a machine, ALMCO will provide installation, unloading and set-up instructions. You can also pay to have an ALMCO representative on site during the installation to ensure the machine is running properly and your operators are trained on using the system.

Do I need to purchase special cleaning chemical compounds to run in the system?

ALMCO carries a line of chemicals including cleaning compounds and rust inhibitors that are sold separately. It is highly recommended that you send in sample parts for testing prior to issuing a purchase order to ensure we find the right cleaning solution for your parts depending on the material and the dirtiness of the parts.

Do I need parts baskets, fixtures, racks or any other accessories to hold my parts?

In some cases parts are too small to stay on the conveyor on their own. ALMCO can help make recommendations for fixtures or baskets used in other customer applications.

What are other facility considerations needed to run this equipment?

You may need an exhaust fan, stack, ducting or a roof opening to allow mist to make its way out of the building where the unit is running. ALMCO offers mist and vapor collectors that integrate into the system and are sold as optional equipment.

How are the tanks cleaned out?

ALMCO provides threaded fittings on the rinse and collection tanks. These are ready for drain valves or piping from tank drain fittings to your wastewater collection system. There is also access doors on the tanks to allow for cleanout.

What if I need a different size machine to accommodate my parts?

If one of ALMCOs stock size units don’t work for your application, our engineers can put together a custom solution built specifically to your requirements. The cost and lead time are also increased with custom modifications.

OPTIONS & UPGRADES

PWRB_Mist Collector

Vapor and Mist Collection

ALMCO will recommend the right system to collect the vapor or mist generated by the cleaning process to ensure the humidity level of your facility is not affected by running the washing system.

SBB PLC Electrical Upgrade

PLC Touch Screen

Add processing control and ease of cycle time adjustments with this touch screen human machine interface. Gain access to machine diagnostics and parameter controls.

RCW Rinse System

Preheating Timer

Have your machine solution tank heated up before the shift starts with a seven day programmable timing unit.

Oil Skimmer

Oil Skimming and Wastewater Treatment

For applications involving cleaning oil-based residue off parts, ALMCO offers an oil skimming solution.

RCW Rotary Cabinet Washer Model Comparison

Specification RTW-25E RTW-20E RCW-36E
Loading Type Top Top Front
Overall Machine Dimensions (Approximate) Length 49″ x Width 41″ x Height 56″ Length 47″ x Width 40″ x Height 57″ Length 65″ x Width 60″ x Height 78″
Turntable Capacity 500 lbs. 100 lbs. 1000 lbs.
Turntable Diameter (In) 25 20 36
Inside Cabinet Height (In) 25 17 50
Turntable Load Height (In) 32 17 34.5
Wash Tank Capacity (Gal) 80 45 100
Rinse Tank Capacity (Gal) N/A N/A 50
Wash Pump 3 HP, 3450 RPM motor 2 HP, 3450 RPM motor 5 HP, 3450 RPM motor
Wash Flow Rate 65 GPM @ 45 PSI 40 GPM @ 35 PSI 80 GPM @ 45 PSI
Rinse Pump HP N/A N/A 1 HP, 3450 RPM motor
Rinse Flow Rate N/A N/A 40 GPM @ 28 PSI
Drain Fitting 1-1/2″ with shut-off valve 1-1/2″ with shut-off valve 1-1/2″ with shut-off valve
Turntable Drive 1/4 HP DC gearmotor 1/4 HP 90 Volt DC gearmotor 1/4 HP 90 Volt DC gearmotor
Turntable Speed 2.5 RPM 6 RPM 3 RPM
Electric Heated Wash/Rinse 18 kW electric immersion heaters 12 kW screw-plug immersion heaters 12 kW screw-plug immersion heaters
Tank Heating Time Rapid electric heating system 70 to 140°F in 1 hour 70 to 140°F in 1 hour
Tank Insulation Insulated cabinet and lid 1″ thick layer of fiberglass 2″ thick fiberglass batting with SS jacket
Machine Construction 304 stainless steel 304 stainless steel 304 stainless steel
Power Requirement 460V (Others Available) 3 Phase, 60 Cycle 460V (Others Available) 3 Phase, 60 Cycle 460V (Others Available) 3 Phase, 60 Cycle
Drive Unit DC Gearmotor Drive AC Variable Frequency AC Variable Frequency
Operator Controls 110 volts supplied by a transformer within the control box 110 volts supplied by a transformer within the control box 110 volts supplied by a transformer within the control box
Electrical Controls Conformance to NEC (NFPA 70) and NFPA 79 electrical standards Conformance to NEC (NFPA 70) and NFPA 79 electrical standards Conformance to NEC (NFPA 70) and NFPA 79 electrical standards
Electrical Enclosure NEMA Type 12 panel enclosure mounted on the machine NEMA Type 12 panel enclosure mounted on the machine NEMA Type 12 panel enclosure mounted on the machine
UL® 508A Electrical Panel Certification Available for additional cost Available for additional cost Available for additional cost

REQUEST A QUOTE

Let’s talk about the right equipment for your operation.

Tell us about your parts and process. Our team will follow up to discuss the equipment and your application.

Name(Required)
Email(Required)
Phone
Tell us about your application, parts, quantities, or any questions.